FAQs

Note that you have to perform body tracking setup and calibrate with your VR setup before you start VRChat. For detailed steps on how to calibrate your avatar please watch Tupper’s YouTube Video.

Solution 1 The problem is that they are being used by Steam and are not available for Driver4VR. Solution: Go to Steam -> Settings -> Controllers -> General Controller Settings, uncheck everything, and restart Driver4VR. Solution 2 Install this: https://github.com/Davidobot/BetterJoyForCemu/releases Before uninstalling the drivers, navigate to http://localhost:26762/ and remove all the devices from the “Currently

Disconnect other USB devices to free up the bandwidth.With only Oculus, Kinect, Mouse & Keyboard connected, just having plugged in USB dongle for Steam Controller or sometimes even USB3.0 flash drive resulted in Kinect behaving improperly (even in Kinect SDK tools).

Some models of Wii Remote don’t pair properly when using Driver4VR. In such case please use Dolphin emulator and launch retail Wii game or channel in dolphin and use “hybrid” Wii Remotes in the controller settings, pair them with 1 and 2 as you normally would. After that, they should be detected by Driver4VR. Please

Go to Control Panel > Hardware and Sound > Sound > Recording and ensure that Xbox NUI Sensor is Enabled. Go to Settings > Microphone Privacy Settings and ensure that checkbox Allow apps to access your microphone is enabled. Uncheck and check if is already checked.

1. Before you start using Kinect on your PC, please install following drivers: Kinect 360 – https://www.microsoft.com/en-us/download/details.aspx?id=40278 Kinect One – https://www.microsoft.com/en-us/download/details.aspx?id=44559 2. Kinect Troubleshooting / Verification (only in case of problems) Kinect 360 – download Kinect Developer Toolkit, start Kinect Tookit Browser and try Skeleton Basics application and Color Basics application https://www.microsoft.com/en-us/download/details.aspx?id=40276 Kinect One –